Peak of Quality info@vettertech.com
Santrale monte edilmiş çift şaftlı mikser ve hidrolik ünite

An unplanned stoppage at a concrete batching plant means truck mixers waiting on site, cancelled pours and lost customers. Most breakdowns can be prevented with regular maintenance. The list below is a general framework; for each piece of equipment, the manufacturer’s maintenance instructions always take precedence.

Daily checks

  • Wash the mixer at the end of each shift; do not let concrete build up on the paddles, arms and discharge gate.
  • Check that the aggregate and cement scales read zero when empty.
  • Clean the belt scrapers and remove material spilled under the belts.
  • Drain condensate from the compressor tank and the air line.
  • Check the grease level of the automatic lubrication unit.
  • Make sure the emergency stop buttons and pull-wire switches are accessible.

Weekly checks

  • Measure the gap between the mixer paddles and the liner plates, and adjust the paddles if necessary.
  • Check belt tension, belt tracking and the drums.
  • Listen for noise and check for overheating at the screw conveyor bearings.
  • Check the oil level of the hydraulic unit and look for leaks in the hoses.
  • Verify that the cleaning system of the silo filters is working.

Monthly checks

  • Check the oil levels of the gearboxes.
  • Check the scales with a known weight; if there is any deviation, schedule a calibration.
  • Check pneumatic gates and cylinders for leaks.
  • Clean dust out of the electrical panels and check for loose connections.
  • Test the silo safety valve and the level sensors.

Annual (or end-of-season) maintenance

  • Change the gearbox oil at the intervals recommended by the manufacturer.
  • Replace the mixer liners and paddles according to wear.
  • Have the scales officially calibrated.
  • Inspect the steel structure for corrosion, cracks and loose bolts.
  • Prepare the water lines and the heating system before winter.
Twin-shaft concrete mixer installed on the plant
Twin-shaft concrete mixer operating on the batching plant

Safety during maintenance

Before working on a mixer, belt or screw conveyor, the power must be switched off and the isolator locked out and tagged. Pressure in the hydraulic and pneumatic systems must be released. The inside of a mixer or silo counts as a confined space; never enter these spaces alone.

Keep a maintenance log

Recording every maintenance job with the date, time and parts replaced makes it easier to spot recurring faults early and to plan your spare parts stock. For details on mixer maintenance, see our twin-shaft mixer guide. For spare parts and periodic service, visit our service and spare parts page or contact us.

Let's choose the right plant for your project

Get a free quote for a concrete batching or crushing plant that fits your capacity, site and budget.

Contact

Call Us for Information

Head Office:
Dağyaka Mah. 2030. Cadde. No: 07
Kahramankazan / ANKARA
Türkiye

+90 506 143 07 55

+90 553 260 38 15

Chat on WhatsApp

info@vettertech.com

Request a Quote

We do not sell ready-mix concrete. We manufacture concrete batching plants, crushing plants and equipment; this form is for plant and equipment enquiries.

Chat on WhatsApp